Two Tungsten Carbide Cutters remove burrs in either direction without removing excessive edge metal.
Burrs are caused by grinding, rock damage and normal abrasion.
(guard removed for picture)
Adjustable roller sets the edge bevel angle from 0(90) to 4(86) degrees in 1 degree increments.
Polycarbonate cutter guard protects the cutters from breakage if the tool is dropped on a hard surface.
Also makes it a good pocket tool.
This tool was developed at the request of several shops that wanted the same type of tool as the side edge BURRBUSTER for de-burring the base edge.
Adjustable roller sets the edge bevel angle from 0(90) to 4(86) degrees in 1 degree increments.
Adjustable roller that sets the base edge bevel from 0 to 2 degrees in 1/2 degree increments. This tool can maintain the edge bevel past the curvature of the tip and tail, which helps prevent the ski from hooking.
You might never need them, however if you do click below to order:
Details for Australia, New Zealand, Chile and Argentina, special:
Upon shipment we will issue a $10 credit to your credit card to help pay for international shipment costs.